顯示繪圖功能

顯示繪圖功能

Lets you select objects in the current document. To select an object, click the object with the arrow. To select more than one object, drag a selection frame around the objects. To add an object to a selection, press Shift, and then click the object.

Draws a straight line where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

Draws a rectangle where you drag in the current document. Click where you want to place a corner of the rectangle, and drag to the size you want. To draw a square, hold down Shift while you drag.

Draws an oval where you drag in the current document. Click where you want to draw the oval, and drag to the size you want. To draw a circle, hold down Shift while you drag.

繪製由一系列線段組成的線條。拖曳繪製線段，按一下來定義該線段的端點，然後拖曳繪製新的線段。按兩下，完成線條的繪製。若要建立封閉形狀，請按兩下此線條的起點。

Hold the Shift key while drawing a polygon to position new points at 45 degree angles.

The Edit Points mode enables you to interactively modify the individual points of the polygon.

Draws a smooth Bezier curve. Click where you want the curve to start, drag, release, and then move the pointer to where you want the curve to end and click. Move the pointer and click again to add a straight line segment to the curve. Double-click to finish drawing the curve. To create a closed shape, double click the starting point of the curve. The arc of the curve is determined by the distance you drag.

在目前的文件中，於拖曳處繪製自由形曲線。若要結束線條，請放掉滑鼠按鈕。若要繪製封閉形狀，請在接近此線條起點的附近放開滑鼠按鈕。

Draws an arc in the current document. To draw an arc, drag an oval to the size you want, and then click to define the starting point of the arc. Move your pointer to where you want to place the endpoint and click. You do not need to click on the oval. To draw an arc that is based on a circle, hold down Shift while you drag.

Draws a filled shape that is defined by the arc of an oval and two radius lines in the current document. To draw an ellipse pie, drag an oval to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the oval. To draw a circle pie, hold down Shift while you drag.

Draws a filled shape that is defined by the arc of a circle and a diameter line in the current document. To draw a circle segment, drag a circle to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the circle. To draw an ellipse segment, hold down Shift while you drag.

在目前文件中，於拖曳滑鼠處繪製水平文字方向的文字方塊。在文件的任意位置，將文字方塊拖曳至所需的大小，然後鍵入或貼上文字。旋轉文字方塊以取得旋轉文字。

Inserts animated text with horizontal text direction into the current document.

在目前的文件中，從拖曳處開始繪製一條在矩形圖說文字 (其文字方向為水平) 中結束的線條。拖曳圖說文字的控點來變更圖例的大小。若要加入文字，請按一下圖說文字的邊緣，然後鍵入或貼上文字。若要將矩形圖說文字變更為圓角圖說文字，請在指標變更為手形時，拖曳最大的角控點。

在目前的文件中，從拖曳處開始繪製一條在矩形圖說文字 (其文字方向為垂直) 中結束的線條。拖曳圖說文字的控點來調整圖說文字的大小。若要加入文字，請按一下圖說文字的邊緣，然後鍵入或貼上文字。若要將矩形圖說文字變更為圓角圖說文字，請在指標變為手形時，拖曳最大的角控點。只有在啟用亞洲語言支援時，才可使用。

在目前文件中，於按一下或拖曳滑鼠處繪製垂直文字方向的文字方塊。在文件的任意位置按一下滑鼠，然後鍵入或貼上文字。也可以移動游標至要增加文字的位置，拖曳文字方塊，然後鍵入或貼上文字。只有在啟用亞洲語言支援時，才可使用。